Product Care & Maintenance - Brass
Brass brings a warm, burnished glow to household items—everything from switch plates and door knockers to bathroom fixtures, furniture, and even kitchen utensils. A strong and corrosion-resistant metal, brass is a relatively inexpensive alloy made from zinc and copper. On account of its bright, golden color, the material has long been a favorite material in home design. However, like any metal, brass can become dull and tarnished over time. Fortunately, with only a little bit of knowledge—and some elbow grease, too—you can learn how to clean brass and keep it clean for the long haul. Believe it or not, many effective brass-cleaning products are already in your kitchen!
Note: The first thing you need to determine is whether the item you wish to clean is, indeed, brass. Though it may look like solid brass, it may in fact be brass-plated steel, zinc, or cast iron. The easiest way to check? Place a small magnet on the metal. Magnets will not stick to solid brass. So if the magnet sticks, the piece is brass-plated. Plated items can be cleaned with hot soapy water, but rubbing or polishing them too aggressively can remove the brass plating, so proceed with caution.
There are numerous ways to clean solid brass. Your approach should depending on the level of dust, dirt, or tarnish that has built up. Here are a few tips and techniques:
- Start with hot, soapy water and a microfiber cleaning cloth: Go over all of the surfaces thoroughly with the cleaning cloth, using a clean toothbrush to get into any crevices. Rinse with warm water and dry thoroughly.
- For tougher cleaning jobs, pull out the ketchup, tomato sauce, or tomato paste. Simply rub a thin coat onto the brass, let sit for an hour or so, and then clean the piece with hot, soapy water.
- Another option is to make a paste of equal parts salt, flour, and white vinegar. Apply the paste to the brass and let sit for up to an hour. Rinse with warm water and buff dry.
- An alternative natural cleaning combination is salt and lemon. Cut a lemon in half and remove the seeds. Coat the cut half of the lemon with table salt and rub it over the surface of the brass, re-coating the lemon with salt as needed. Once you’ve covered the entire surface, buff to a shine with a clean, dry cloth. You can also make a paste using two parts cream of tartar powder to one part lemon juice—rub the paste on the brass, let sit for 30 minutes, rinse with warm water and buff.
- Commercial metal cleaners and polishes can also be effective for cleaning brass and are commonly available at most home centers and supermarkets. Leading products available on Amazon include Brasso, Bar Keepers Friend, Never Dull, Cameo, Hagerty and Blitz.
Mistakes to Avoid
There are a few areas of concern that you should be aware of when it comes to polishing and cleaning brass:
- Avoid using highly abrasive scrubbing cloths, metal-bristled brushes, or steel wool; these will scratch the surface of the brass.
- To prevent tarnishing, a thin coating of linseed oil or mineral oil can be applied to clean brass with a soft terry towel.
- Many brass objects are protected with a lacquer finish and should only be cleaned with hot, soapy water. If pieces of this type are heavily tarnished, you will need to remove the lacquer with a paint or varnish remover, clean and polish the brass using one of the techniques above, then re-lacquer the piece.
- You should avoid touching your brass items as much as possible; oils in your skin can hasten tarnishing.
Regular cleaning and polishing with a microfiber cloth will help keep dust and dirt from accumulating and keep your brass accents lovely and lustrous.